Product

Water treatment system equipment
5 gallon bottling line
Small PET bottle filling line
5 Liter filling line
10 liter filling line

  • Inner washer
  • Location:Home - Product - 5 gallon bottling line - Inner washer
Inner washer


 

                                                                                                                                       


 

 

FIVE GALLON BOTTLE INNER WASHER

Model
Capacity(BPH)
Washing column
Dimension L*W*H(MM)
NX-300
300
2
14
NX-450
450
3
14
NX-600
600
4
14
NX-900
900
6
14
NX-1200
1200
6
18
NX-1500
1500
8
18
NX-2000
2000
10
24
NX-2500
2500
12
24
NX-3000
3000
14
24

Remark: Dimension of NX-300 to NX-600 covers filler, while the dimension of the model from NX-900 to NX-3000 excludes size of filler.
Configuration
Pneumatic components: FESTO, SMC, AIRTAC
Rinsing pump: GRUNDFOS, WILO, CNP
Motor and gear box: SITI, MOTOVARIO, HATECH, SEW
Water tank: 316L stainless steel for 3 layer detergent tank, 316L stainless steel disinfectant tank, 304 stainless steel reused water tank.
Nozzle: Spray type, annular type, multi-holes type, mist spray type, spiral type.
The metal frame of the whole line is made by stainless steel SUS304
Electronic components: PLC—Siemens, Inverter—Danfoss, Sensor—Carlo, Contactor—Schneider
Model—Capacity(B/H)—Washing column—Washing stages—Dimension L*W*H(MM)
Remark: the dimension of the model from NX-300 to NX-600 covers filler, while the dimension of the model from NX-900 to NX-3000 excludes size of filler
Features
The chamber body of inner washer is made of 4mm SUS304 stainless steel, assuring the strength
The detergent liquid tank is 3-layer structure one with heat-preservation material, modular electrical heating system, liquid level detector, and temperature controller.
All tanks are equipped with automatic water replenish mechanism, automatic chemical dosing system is optional
All tanks adopt round seal head, no dead angle, manhole is equipped on the side of tank, which gives convenience for clean.
2-layers washing pipe adopts food grade silicone wire hose with stainless steel cover, enhancing reliability. Clamp type connector ensures easily installing and dismantling.
Both ends of the rinsing pipe can be easily removed for internal clean, all “T” shape pipes are pull-welding, which assure the hygiene grade
With special bottle mouth’s clean and disinfect device
Optimized inner washing process by adopting re-using the detergent liquid, disinfection liquid, and product water reduces the running cost.
Each row of nozzles is equipped with one individual pump (for model NX-1200 or above), no bottle, no rinsing.
Bottom plate of chamber is tilting; allowing quick-flow of liquid, reducing the ponding, and avoiding contamination.
Protective cover on running parts assures the operation safety.
3-step bottle feeding process reduce the hurt to the bottle and the noise of the device
Enough space from the bottom of the device to ground, easy for clean
 
 
 
HIGH PRESSURE RINSING OF HOT DETERGENT LIQUID
Process definition
17-3

Nozzle
stages
Pressure (MPa)
Temperature
(℃)
Description
#1
Mid-temperature detergent liquid
0.4
40-50
Rinse the bottom of the bottle by plane-head nozzle
#2
Mid-temperature detergent liquid
0.4
40-50
2 cycles slowly scrape-like rinsing to the bottom and lower part of the bottle by annular-shape nozzle
#3
Mid-temperature detergent liquid
0.4
40-50
2 cycles scrape-like rinsing to the upper part of the bottle and bottle neck by slowly moving annular-shape nozzle
#4
Mid-temperature detergent liquid
0.4
40-50
2 cycles scrape-like rinsing to the bottom of the bottle by slowly moving annular-shape nozzle
#5
High-temperature detergent liquid
0.6-0.8
40-85
2 cycles scrape-like rinsing to the bottom and lower part of the bottle by slowly moving annular-shape nozzle
#6
High-temperature detergent liquid
0.6-0.8
40-85
2 cycles scrape-like rinsing to the upper part of the bottle and bottle neck by slowly moving annular-shape nozzle
#7
High-temperature detergent liquid
0.6-0.8
40-85
2 cycles scrape-like rinsing to the bottom of the bottle by slowly moving plane-head nozzle
#8
Drip-dry
Recover all residual chemical liquid in bottle, reduce the neutralization to disinfection liquid

 
 Features
 The difficult fouling can be completely cleaned by 0.6-0.8MPa high-pressure scrape-like rinsing
 No dead angle design of the nozzle guarantee the rinsing efficiency to anywhere of the bottle
 Hurt to bottle is avoided by adopting high-temperature rinsing after mid-temperature rinsing which otherwise occurs due to drastic temperature change
 The drip-dry stage can maximumly collect back all residual chemical liquid in bottle, reducing the consumption of disinfection and detergent liquid
 4 times scrape-like rinse, each time covers 2 cycles of nozzle slow up-and-down movement, assure the best clean efficiency to the internal surface of the bottle